A door is a hinged or otherwise moveable barrier that allows people to enter and leave a room. The hole made in the wall is a door or a portal. The primary and most important purpose of an entrance is to keep people safe by controlling access to the doorway (exit). Usually, a panel fits into a building, room, or vehicle’s opening (portal). Most entrances are made of a material that provides the entrance job. Most entrances are held together by hinges, but they can also move in other ways, such as by slides or being pushed or pulled.
The door may be able to open or close in different ways, such as at an angle away from the entrance or portal, by sliding on a plane parallel to the frame, by folding at an angle on a parallel plane, or by turning on an axis in the middle of the frame. Most of the time, the inside of an entrance is the same as the outside. But sometimes, like at a car entrance, the two sides are very different.
Many entrances have ways to lock them so that only certain people can open them (such as with a key). People can let you know they are knocking on the door or ringing the doorbell. In some places, like Brazil, it is common to clap from the sidewalk to let people know you are there.
Aside from letting people get in and out of a room, entrance can also do things like keep people from prying eyes, separate rooms with different purposes, let light in and out, control ventilation or air drafts so that rooms can be heated or cooled more efficiently, reduce noise, and stop fires from spreading.
The entrance can be used for looks, symbols, and rituals. For example, getting the key to a door can mean going from being on the outside to being inside. In addition, entrances and doorways are often used as symbols or allegories in literature and the arts to show that something is about to change.
Different kinds of entrances are used for other things. The most common type is the single-leaf entrance, which has a single rigid panel that fills the entrances. However, this basic design has many variations, like the double-leaf entrance or double entrance and French windows, with two adjacent independent panels hinged on each side of the entrance.
A half Dutch or stable entrance is split down the middle. Usually, the top half opens so a worker can feed a horse or other animal, while the bottom half stays closed to keep the animal inside. This kind of entrance is now used in homes.
Saloon entrances are a pair of light, swinging doors common in bars, especially in the American West. Saloon entrances, also called cafe entrances, often have hinges that work in both directions. These hinges use springs to close the entrance no matter how it opens. Batwing entrances are saloon entrances that only go from knee level to chest level.
A blind entrance, Gibb entrances, or jib entrances don’t have any trim or moving parts that can be seen. It has the same finish as the wall next to it, so it looks like it’s part of the wall and not an entrance. A French entrance has a frame with one or more precise or translucent panels (called lights or lites) that can be put in alone, in pairs, or even in a row.
A pair of these entrances that go together is called a French window because it looks like a casement window that is the same height as a door. When a pair of French entrances is used as a French window, it usually doesn’t have a central mullion like some pairs of casement windows do. This makes the opening more considerable and more open.
In addition, most frames need a weather strip at the floor and where the entrance meet to stop water from getting in. With an espagnolette bolt, the top and bottom of each entry may be locked simultaneously. The thin window joinery lets the most light into the room and makes the entrance joinery less noticeable from the outside. The entrance of a French window usually opens out onto a balcony, porch, terrace, or balcony, and they may also lead to a garden.
A louvred entrance has wooden fins that can be fixed or moved. These fins are often called slats or louvres, and they let air in a while, keeping the room dark and private. Since they aren’t solid, they are usually used for closets and drying rooms where security isn’t as crucial as airflow.
A very similar structure is often used to make window shutters. When Gwendolyn and Powel Crosley built Seagate in Florida in 1929, they added a double louvred entrance. These entrances let in air and gave Seagate more privacy because you can’t see through the fins in any direction.
A single-leaf composite door can be solid or have glass, usually filled with high-density foam. Most composite doors in the UK are certified to BS PAS 23/24 and meet the requirements of Secured by Design, which is an official UK police initiative. A steel security entrance is made of solid steel and is often used to protect vaults and safe rooms from attacks.
These can also have wooden panels on the outside to look like standard interior and exterior entrances. A flush entrance has plywood or MDF attached to a light wood frame. The hollow parts of the structure are usually filled with cardboard core material. Hardboards can also be used to make skins. William H. Mason made the first one in 1924.
It was created by pressing and steaming wood chips into boards, which gave it the name Masonite. Most flush entrances are used inside a house, but slightly thicker versions are sometimes used as an exterior entrance, especially in hotels and other buildings with many separate apartments.
A moulded entrance is built in the same way as a flush door. The only difference is that the surface is made of MDF that has been shaped. Hardboards can also be used to make skins.
A ledge and brace entrance, also known as a board and batten entrance, comprises several vertical panels held together by two or more horizontal timbers called ledges (or battens). Sometimes, diagonal timbers called braces are used to keep the entrance square.
A wicket entrance is a small entrance built into an enormous entrance that lets people get in without opening the giant entrance. You might find an example on the ceremonial door of a cathedral or the door of a big vehicle in a garage or hangar.
A bifold entrance folds up in pairs of two pieces. Most doors are made of wood, but they can also be made of metal or glass. Most of the time, bi-folds are made for closets, but they can also be used in separate rooms.
Bi-fold entrances are now doors that let the outside in. The panels fold up against each other and are pushed together when the entrance is opened. The main entrance panel, which is often called the “traffic entrance,” is accompanied by a stack of panels that fold very neatly against each other and look almost like room dividers when the entrance is fully open.
A sliding glass entrance is an entrance made of glass that slides open and is sometimes called an Arcadia door or patio entrance (a removable metal mesh that covers the entrance). Australian entrances are a pair of swinging doors made of plywood often found in Australian pubs. These entrances are red or brown most of the time, and they look like the more formal entrance in pubs in other British Colonies.
A wall decoration that looks like a window is called a false entrance. The wrong door was a standard part of tombs in ancient Egypt. It was thought to be a way to get to the afterlife. They are also used in the architecture of the graves of the desert tribes (e.g., Libyan Ghirza).
A doormat is a mat usually placed in front of or behind the entrance of a house. This started to keep mud and dirt from getting on the floors inside a building.
Let’s talk about the Top 10 Door Manufacturing Companies in India in 2022.
- Mangalam Timbers Private Limited
Since 1982, Mangalam Timbers Private Limited has been making entrances for homes that are both safe and attractive. The main things they sell are:
- Entrances that have already been laminated.
They are known for coming up with the idea of “everything in one place.” To make things even easier for their customers, they also sell kitchen shelves and wooden cabinets. The company has done well using both waste wood and wood from plantations. The company is known as one of the biggest and best entrance companies in India because it does a lot of research to develop new products and market them. There are Mangalam stores all over the country.
2. Greenply Wooden Doors
Greenply Wooden Doors is thought to be one of the best places in India to make wooden doors. Greenply was started in 1990 and made entrance made to order for each customer. The main things they sell are:
- Green Gold entrance
- The Ecotec entrance
- Green entrance
- Green Club entrance
- Optima G SWF entrance
Greenply’s flush entrance is thought to be some of the best on the market. They are stable, have a high level of security, and can stand up to different weather conditions. In addition, Greenply’s method of ensuring enough products on the market makes them stand out in the entrance industry. Even though it is one of India’s most popular and affordable door brands, the company is also using a sustainable farm management strategy to develop farm forestry that can meet their material needs.
3. CenturyPly Plywood
When looking for the best door company in India, CenturyPly Plywood comes to mind right away. Since its start in 1982 in Kolkata, CenturyPly has built a good reputation for itself and is now known as one of the most popular and best plywood door manufacturers. The main things they sell are:
- Straight entrance
- Veneer entrance
- Bond Doors Club Prime entrance
- Melamine Door Skin
The entrance is made to match the beauty of the inside and the outside of the house. One of the main reasons to use CenturyPly Plywood is that it makes an excellent material for making a different entrance, both for homes and businesses.
4. Maxon Doors
In 2007, Maxon Doors was founded. The company makes engineered entrances that combine “beauty with strength” to meet the needs of today. Maxon Doors is one of the best door manufacturers in India. They do this by using a lot of high-quality machinery and tools to make the process of making entrances more efficient.
Maxon Doors gets its raw materials from companies that care about the environment. There are videos on the company’s website that show how the different layers of wood make the entrance stronger. This is why the company says it will make a long-lasting and good entrance for the environment. The main things Maxon Doors makes are:
- Teak Wood entrance
- Natural Veneer entrance
- Recon Veneer Laminate Line entrance
- Laminate Royal Art entrance.
5. Shree Balaji Wood Impex
Shree Balaji Wood Impex works in different parts of the country to make decorative doors. Shree Balaji Wood Impex has been around since 2011. It is well-known for its wide range of wooden doors and window frames. Shree Balaji Wood Impex sells doors under “GSM Doors.” They are thought to be one of the best entrance companies in India. The company has made changes to its plant that are good for the environment. This is a common practice in the door industry. The company promises to give you style and safety. The main things that Balaji Wood Impex sells are:
- Nagpur Teak Woods GSM Wood Doors
6. Pure Wood Doors
Pure Wood Doors is known for its custom wooden entrance. They have a lot of experience making doors for homes and hotels. Since it started making wooden doors in 1997, the company has grown to become one of the best in India. Pure Wood Doors makes high-end doors that are a good value for homeowners. Customers always choose Pure Wood entrance when they want a strong and durable wooden entrance. The main products of the company are
- Contemporary Wood entrances
- Solid Wood entrances
- Oakwood entrances
- Teak Wood
- Door Beechwood
7. Mikasa Doors
Mikasa Doors is known as one of the biggest door makers in India. The company is also known for having a large selection of door accessories. Mikasa has a variety of entrance frames to meet the needs of each customer. In addition, the company makes entrances ready to be put in, which helps prevent damage while the doors are being made and put in. Mikasa also has many laminates, paints, and veneers to choose from, depending on how the door will be used and where it will be in the building.
Mikasa also makes many accessories that can be used to decorate the inside of a home. Also, they can sometimes come up with new designs has given them an edge over their competitors. These are what they sell:
- Fire-resistant entrances
- Doors that aren’t fireproof
- Single wood entrances
- Double wood entrances
- Sets for special entrances
8. Mini Max plywood
Mini Max plywood is well-known as one of the best door companies in India. With customer satisfaction at the heart of the business, the company is always ready to make doors that fit the needs of each customer. In 2003, Mini Max Plywood opened for business. They know a lot about wood because of their many years of experience. This lets them offer custom designs that help customers get the most for their money. So if a homeowner wants a strong, long-lasting entrance, they can always count on this brand, whose main products are:
- Flush entrance
- Moulded designer entrance
9. Supreme Industries
Supreme Industries has been located in Telangana. Supreme Industries has been around since 1942. It is known as one of India’s best entrance brands, and its high-quality wooden doors are trendy. They have made plywood, wooden entrance, and veneers, all of which are types of wood entrance products. How well a wooden product does on the market depends on how it’s made on the inside.
So, Supreme Industries focuses on creating high-quality entrance at both low and competitive prices. Also, the company has an excellent reputation for delivering on time and being responsive to customer service needs. The Supreme Effects support team is always ready to answer questions from customers. The main things they sell are:
- Steel entrance
- Cold room entrance.
10. Doormark
The principal office of Doormark is in Jaipur, Rajasthan. The company’s ability to meet the needs of young people has made it very well-known in its field. As a brand aimed at young people, the company does research on how young people’s tastes and trends change so it can meet their needs. Doormark makes high-quality doors with designs that appeal to young people and protect the environment. Since it started, the company has teamed up with several international brands to bring trendy and modern products to the market. The main things they sell are:
- Modern slab entrance
- Traditional square entrance
- Standard doors with a round corner
- Applying Molds
